K6CM-VBM

Motor Condition Monitoring – Vibration & temperature type

Quantifying the status of a three-phase induction motor and pump. The alarm output threshold default is set. You can customize the value according to the site. As for comprehensive current diagnosis, the degradation can be detected comprehensively by combining each motor part and the load side. The insulation resistance of the threephase induction motor and pump can be measured with current flowing (the secondary side leakage current of the inverter can also be detected).

  • The alarm output settings can be made according to the device, with reference to the threshold value that has already been set by default.

  • Depending on the threshold value setting for alarm output, the condition of the motor can be displayed on an alarm bar in three colors; Green (normal), Orange (warning), and Red (critical).

  • Equipped with a transistor output that externally outputs the status of the motor and error states of the K6CM main unit.

  • Monitoring can be performed easily on the PC by EtherNet/IP communication and a dedicated tool.

  • The numeric values of vibrations, temperature, insulation resistance, and current can be monitored by the same dedicated tool.

  • The trend of the motor condition can be monitored by a dedicated tool, and thus indications of a degradation can be monitored.

  • Clamp-type CT/ZCT that supports easy post installation. With a clamp-type CT/ZCT, the device can be installed without changing or removing the existing wiring, which makes post-installation easy.

  • Comes with the self-diagnosis function of the main unit internal circuit and analog sensing circuit.

  • Push-in Plus Terminal Technology reduces wiring work (double-insertion holes for crossover wiring).

  • UL listed for easy shipping to North America (ZCT (IRT) is UL recognized).

Datasheets

K6CM Motor Condition Monitoring Device

K6CM takes the burden of monitoring motors off maintenance engineers. Motors can be maintained in advance of failure due to deterioration. K6CM (comprehensive current diagnosis type) can consistently monitor motor conditions by observing the current waveform of the motor. Additionally, you can understand the motor’s maintenance timing without depending on an engineer, because K6CM provides threshold value setting.

Related Products

K6CM-ISM

Motor Condition Monitoring Device

K6CM-CI2M

Motor Condition Monitoring Device

K6PM-TH

Thermal Condition Monitoring Device

K7GE-MG

Insulation resistance monitoring device

News

Corporate news, articles & white papers